Overview
An open-source breakout board that you can plug a Raspberry Pi Compute Module into. Provides a starting template for those who want to design with the Compute Module, and a quick way to start experimenting with the hardware and building and testing a system before going fabricating a custom board.
Provides:
Power to the module.
Gives the ability to program the module’s Flash memory.
Connector and pin access to the processor interfaces.
HDMI
USB
Schematic
IO Board
http://www.raspberrypi.org/documentation/hardware/computemodule/schematics.md
USEFUL?
We benefit hugely from resources on the web so we decided we should try and give back some of our knowledge and resources to the community by opening up many of our company’s internal notes and libraries through mini sites like this. We hope you find the site helpful.
Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site. If you need help with a problem please use one of the many online forums.
3 years ago
no, peripherals wont work in any case but a few lucky instances so no keyboard, mouse or ethernet meaning no way to use or control it
7 years ago
Is this compatible with the new Compute Module 3 (CM3)?