Compute Module Versions

Compute Module 3+/32GB

  • 32GB Flash memory

Compute Module 3+/16GB

  • 16GB Flash memory

Compute Module 3+/8GB

  • 8GB Flash memory

Compute Module 3+/Lite

  • No eMMC Flash memory – SD card interface brought out to the Module pins so you can wire this up to an eMMC or SD card of your choice

Technical Documentation

The Compute Module datasheet, schematic, etc is available here.

Hardware

The Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+:

  • Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.2GHz processor
  • 1GB LPDDR2 SDRAM RAM
  • 8/16/32GB eMMC Flash memory which is the equivalent of the SD card in the Pi, or a SD card interface.

Connector:

A standard DDR2 SODIMM connector

All remaining processor interfaces are available to the user via the connector pins, so many more GPIOs and interfaces are available compared to the Raspberry Pi 3+.

USEFUL?
We benefit hugely from resources on the web so we decided we should try and give back some of our knowledge and resources to the community by opening up many of our company’s internal notes and libraries through mini sites like this. We hope you find the site helpful.
Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site. If you need help with a problem please use one of the many online forums.

Comments

Your email address will not be published.