Configuring LXDE to start the Midori browser on login
This solution works really well. Once the browser loads there is a small black square in the top left of the screen which seems to be a general bug (its mentioned on forums by others) but otherwise the fullscreen mode hides everything except the browser page.
Edit the autostart file:
sudo nano /etc/xdg/lxsession/LXDE/autostart
Comment out everything using a '#' at the start of each line and then add the following lines
# Auto run the browser
@xset s off
@xset -dpms
@xset s noblank
@midori -e Fullscreen -a http://google.com
If necessary use the configuration tool to enable auto running of the GUI on powerup
sudo raspi-config
If you need to exit back to the command prompt
CTRL + ALT + F1
CTRL + ALT + F2
To ensure you have an internet connection first
See here
USEFUL?
We benefit hugely from resources on the web so we decided we should try and give back some of our knowledge and resources to the community by opening up many of our company’s internal notes and libraries through mini sites like this. We hope you find the site helpful.
Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site. If you need help with a problem please use one of the many online forums.
4 years ago
1stly you have to install midori browser
sudo apt install midori
4 years ago
No longer works but this did…
http://www.knight-of-pi.org/update-autostart-chromium-for-full-screen-applications/
I’m not afiliated. Just helping to point others looking for this info.
4 years ago
literally tried every option and suggestion from everyone…your codes don’t work
8 years ago
on raspbian 8, instead of
@midori -e Fullscreen -a http://google.com
I was writing
@chrome-browser -e Fullscreen -a http://google.com
but it is not working..
and it doesn’t works with the original midori line too..
7 years ago
Sorry for the obviously late reply but I’ve been doing this myself lately.
Try adding
@chromium-browser http://www.google.com
it works a bit different from its midori counterpart but the effect is a full screen web session without address bar.
4 years ago
Also, do not forget that you have to install Midori first (sudo apt update ; sudo apt install midori)… :-)
9 years ago
Nice article, works really well for our customer info points. (Just a R-Pi mounted to the back of a touchscreen, pointed to a local website)
9 years ago
This doesn’t seem to be working for me:
In /etc/xdg/lxsession/LXDE-pi/autostart I have;
@lxpanel –profile LXDE-pi
@pcmanfm –desktop — profile LXDE-pi
@xset s off
@xset -dpms
@xset s noblank
@unclutter -idle 5
@midori -e Fullscreen -a http://google.com
The unclutter tool is working (the cursor disappears after 5 seconds, but midori doesn’t launch. and commenting out the first two lines has no effect. I have the pi booting directly to the desktop. The only thing I can think that I installed that messed this up is xscreensaver. Any help would be appreciated!
9 years ago
Hello, form me don’t work, i tried to put the code in autostart file but nothing, can anyone help me?
10 years ago
Hello,
New here and also new to the Rasp Pi Community. I have a question.
Currently I have a Rasp Pi Running Raspbian with it auto loading Midori into fullscreen going to my desired website url.
My issue is I have changed the font setting in the Midori Browser to font 20+
in which works fine when I load Midori myself. BUT when Midori loads during the auto boot it loads the default Font sizes in which are too small to read. How do I change the font settings so Midori will auto boot and load to full screen with the desired Font setting I choose to have loaded?
10 years ago
If you’re using NOOBs you may need to use the LXDE-pi folder.
pi@raspberrypi ~ $ sudo nano /etc/xdg/lxsession/LXDE-pi/autostart.
10 years ago
This worked for me- Thank you!
10 years ago
how do I install xset?
9 years ago
sudo apt-get install x11-xserver-utils
10 years ago
I have strange problem, Midori closes itself at night . When is reboot device in morning it start fullscreen and when I leave work its still fullscreen. Next day I come back and midori has closed, only desktop is there. I checked camera where I can see screen and there I can see how midori closes at night, no error message no nothing and so each night same time
4 years ago
When i add the line, “@midori -e Fullscreen -a https://www.google.com (for example), Midori comes up, but does not navigate to google. If I leave out “-e Fullscreen -a”, everything works like it is supposed to, just not in fullscreen mode. Ideas?
4 years ago
Important to note that you may need to install xset. Which is depreciated, there is another package named x11-xserver-utils
Other wise the @xset commands will not work. ;)
4 years ago
Nice article. Is there a way to hide the mouse cursor automatically as well?